GMC Jimmy Camber Kits

These heavy duty cams replace the upper control arm mounting bolts. Remove the O.E. bolts and replace with cams, rotating them to provide camber and/or caster adjustment. It may be necessary to remove O.E. slugs and elongate the bolt holes with 74910 punch. 83790 contains 2 cams to cover one side of...

The 83710 is a stock OE replacement cam/bolt kit for the popular Chevy S-10/Blazer and GMC Sonoma/Jimmy. Adjust 1.25 degrees camber and caster with this simple to use set-up....

These heavy duty cam bolts replace the upper control arm mounting bolts. This kit has the added convenience of slip-on cams which makes installation easier. Remove the O.E. bolts and replace them with these cams, rotating to provide camber and caster adjustment. Use 74910 punch to remove the O.E. sl...

Replace the upper OE bushing with these offset control arm bushings to get 1.0 of additional camber change. OE style rubber maintains the original ride characteristics....

This sleeve set will change camber and/or caster from 1/8 degree to 1-1/2 degree in 1/4 degree increments. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed and replace the existing sleeve with the correct on...