Ford Explorer Camber Kits

Additional Patents Pending China Patent No. ZL 20163002294.X...

Drive up to 2 camber and caster change on the front of the Ranger, Explorer, Mountaineeer, and B-Series Pickup by replacing the stock bolt and locking plate with this cam bolt kit from SPC. The 3/8" drive receiver on the cam allows for easy access from either side of the upper control arm to make yo...

Caster and camber adjustments can be made easily by installing this kit. By replacing the stock alignment washers on the upper control arm, caster and camber can be adjusted by turning the cam nuts to obtain the proper readings. These cam kits give you the full range of caster and camber adjustment ...

This camber adjuster lets you easily adjust camber on the newer Explorer/Mountaineer fully independent rear suspension systems. Full range of camber adjustment can be made by replacing the stock alignment washer on the rear lower control arm and installing the plate and cam nut. Camber can then be a...

This set of 4 cams allows for quick installation without having to remove the upper control arm bolt. Change camber and caster up to 1.75....

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 sleeve puller to remove the existing sleeve. To split camber and caster a...

This sleeve will easily change Camber and/or Caster 0.25° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster .50° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to d...

This sleeve will easily change Camber and/or Caster .75° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to d...

This sleeve will easily change Camber and/or Caster 1.00° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 1.25° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 1.50° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 1.75° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 2.00° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 2.25° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 2.50° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 2.75° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 3.00° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 3.25° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 3.50° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

This sleeve will easily change Camber and/or Caster 0.00° on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23199) to ...

Inventory getting out of hand? Just need to fill in a few odd sizes? An adjustable Sleeve may be just what you need. These sleeves can adjust camber and/or caster in a large variety of combinations....

This sleeve puller will pull both O.E. and most aftermarket camber/caster sleeves quickly and efficiently, usually without damaging the ears of the sleeve. Heat treated high strength steel. Single-unit design with no loose parts....