1978 Ford E-150 Econoline Camshafts - Page 4

Xtreme Energy 248/254 Solid Roller Cam for Ford 351W. Good in weekend warriors with 3000+ stall. Needs aftermarket intake and exhaust with low Gears....

Xtreme Energy 254/260 Solid Roller Cam for Ford 351W. Best for Pro Street applications. Needs aftermarket intake and exhaust, 11:1+ compression and 3500 stall....

High Energy 206/206 Hydraulic Flat Cam for Ford 240-300. Good torque and mileage for 240-300. Excellent throttle response....

High Energy 212/212 Hydraulic Flat Cam for Ford 240-300 6 Cylinder. Excellent torque and power for towing in 300 c.i.d. Smooth idle....

High Energy 218/218 Hydraulic Flat Cam for Ford 240-300 6 Cylinder. Moderate performance Camshaft for 300 c.i.d. Strong mid-range RPM power, noticeable idle....

Edelbrock Performer-Plus Camshaft #2117 is designed for 283-400 Chevy V8 engines from 1957-86 and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2117 i...

Edelbrock Rollin' Thunder Camshaft #2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks...

Edelbrock part #22815 Rollin' Thunder camshaft kit is designed for 1969-93 small-block Ford 351W V-8 applications. This complete cam kits include an Edelbrock Rollin' Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin' Thunder camshaft kit is ground specifically for...

Edelbrock part #7182 Performer RPM Camshaft is designed for Ford 351W V-8 applications. This Edelbrock cam kit produced 400 HP & 412 ft-lbs. of torque when used with #7181 intake and #60259 cylinder heads on a 351W engine. The camshaft works well with high-performance's street applications, Performe...

Edelbrock part #2182 Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with #2181 intake and stock iron cylinder heads on a 351W engine. The camshaft will produce optimum torque from the low-end to the mid-...

Edelbrock Rollin' Thunder Camshaft #2221 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, tr...