1062-R UMI Performance Lower Control Arms

Bolt-on rear upper control arm upgrade with Roto-Joint for better traction, handling, and on-car adjustability. Built from DOM steel tubing with a spacer kit to fix oversized factory mount holes..

Spacer Kit: Part #1058 spacer kit designed to fix the oversized hole problem with the factory rear upper control arm mount. Where the rear upper control arm mounts to the chassis Ford uses a 14mm bolt and a 14mm hole in the upper control arm, however the hole in the chassis mount is 16mm. This stepped spacer set is designed to take up this slop and eliminate noise and clunks from the upper control arm area. This is done by reducing the hole size from 16mm to 14mm which does not allow the bolt to shift during acceleration and braking. The spacer kit slides into the upper mount and steps the hole size down to the correct diameter of 14mm, this allows for a tighter fit and no more clunking! Note: This kit is designed to work with the OEM upper control arm mount. It will work only on aftermarket control arm mounts that use a 16mm hole. Most aftermarket companies supply there new upper mounts with 14mm holes.

Features:

• On-car adjustable using a chrome moly, heat-treated adjuster
• 4140 chrome moly threaded tube adaptors

Product reviews for all UMI Performance Lower Control Arms.

There are no reviews yet.