105782 Motul 105782 Motylgear

TYPE OF USE: All mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential and transfer gearboxes without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.; Specially recommended for gearboxes hard to shift and Peugeot, Citro?n, Renault gearboxes, and all other OEMs requiring a gear oil in SAE 75W-80 viscosity grade.; PERFORMANCES:; STANDARDS: API GL4 and GL5; Technosynthese Extreme Pressure lubricant for efficient anti-wear protection reinforced with synthetic base stocks for better resistance at high temperature and longer life time.; Stays in 80 viscosity grade after KRL 20 hours shear test as requested by SAE J306 Standard.; Very high lubricating power which decreases friction and wear.; Viscosity grade 80 at high temperature reduces gearbox drag and then fuel consumption while guaranteeing high protection level on gears.; Fluid at low temperature to allow easier gear shifting when the gearbox is cold.; Less effort required on the gear lever to shift the gears.; Suitable for any type of seal and yellow material used in gearboxes design.; Anti-corrosion, Anti-foam.; RECOMMENDATIONS: Oil change: According to manufacturers' requirements and adjust according to your own use.. Technosynthese Gearbox and Differential Lubricant; Standards: API GL-4 and GL-5 / MIL-L-2105D.

Technosynthese lubricant mechanical transmission. This product is specially designed to fit mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential and transfer gearboxes without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. This Extreme pressure lubricant offers an efficient anti-wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time. This product has a high power of lubrication and decreases friction and wear, it has also anti-corrosion and anti-foam properties. This viscosity grade (SAE 80) at hot temperature reduces gearbox drag and fuel consumption. Its high fluidity at low temperature allow easier gear shifting when the mechanical parts are cold. Less effort is then required on the gear lever to shift the gears. Suitable for any type of seal and yellow material used in gearboxes design requiring API GL-4 / GL-5 and MIL-L-2105D standards.

Product reviews for all Motul Motylgear.

There are no reviews yet.