B005B-T ISC Suspension N1 Basics - Track/Race

ISC Basic Coilover Kit include 32 way adjustable damping, height adjustability, monotube dampers, mounting hardware, gold anodized aluminum non-adjustable top plate featuring a rubber top mount for comfort and are 100% rebuildable!.

New features for the ISC V2 Basic Coilover include: New V2 Adjustable End links: When applicable our V2 N1 and V2 Basic kits will include updated adjustable end links (check application guide to determine adjustable end link eligibility) Spring Perch Isolator Pads: Revised hardened spring perch isolator pads reduce friction, allowing for more efficient preload adjustment and a longer product lifespan. Other New Features: Copper based anti-seize lubricant now included for coilover setup/installation. ISC Coilover Covers are now included with every coilover kit we offer. Our 3mm neoprene protective covers will help shield your coilovers from the elements and allow for seamless height adjustment for years to come. Whether you have a dedicated track car, or a daily driver, the ISC coilover covers will help protect your investment.

Features:

• ISC Springs are made from SAE9254 steel, dyno tested over 500,000 times on compression inspection with less than 5% deformation, fully customizable spring rates (spring rates vary depending on application, custom spring rates are available)
• Ride Height Adjustable
• Full length height adjustability of up to 3 inches on most applications, High quality T6061 aluminum alloy used for all adjustment locks to provide a lightweight design that holds spring and vehicle down force
• Threaded portion of shaft is powder coated and salt spray coated for street durability (suggest using anti seize or protective products when installing coilovers for more protection from the elements, if exposed to snow and salt)
• Piston Design
• High rigidity steel piston rods, Meets race/sport standards, Shafts are valved according to the spring rate, Shock dyno is used to ensure quality and consistent results
• Warranty
• ISC Suspension offers a LIFETIME WARRANTY to the original purchaser against defects in workmanship and material. For more info on this please refer to ISC Warranty
• Single Cylinder Design
• Mono-tube damper with high pressure nitrogen, larger cylinder and piston design to advance driving stability and dexterity
• Basic Upper Top Mount
• T6061 anodized aluminum top plate with isolated rubber bushing for better road compliance
• Preload is separate from ride height, the lower you go, the ride quality stays the same
• Rebound/Compression adjusted in unison via 32-way adjustment knob
• Certifications
• ISO9001, 2000R Certified and ARTC Certified
• Bound Adjustable with Separate Spring Locks
• 32-Way Damping Adjustability

Product reviews for all ISC Suspension N1 Basics - Track/Race.

There are no reviews yet.