3714 Edelbrock 3714 Performer-Plus Camshaft

Edelbrock Rollin' Thunder Camshaft #3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range..

Edelbrock Rollin' Thunder Camshaft #3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. For use with OEM hydraulic roller lifters (use original lifters). Not for 1992-Later 4.3L balanced shaft engines. Requires aftermarket computer chip (not available from Edelbrock) for use with intake manifold #3713. Call Edelbrock Tech 800-416-8628 for info.Camshaft specifications:- Intake duration: 210 Degrees- Exhaust duration: 214 Degrees- Intake lift: .479"- Exhaust lift: .488"- Lobe separation: 112 Degree- Intake Center Line: 107- Vacuum: 17"

Features:

• Take the Guesswork Out of Camshaft Selection!

Product reviews for all Edelbrock Performer-Plus Camshaft.

There are no reviews yet.