There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP032 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your 1964-1966 GM A-body 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspensions SP032 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.
| Years | Make | Model | Trim | ||
|---|---|---|---|---|---|
| 1965 - 1966 | Buick | Gran Sport | Base | ||
| 1964 - 1966 | Buick | Skylark | Base | ||
| 1964 - 1966 | Chevrolet | El Camino | Base | ||
| 1964 - 1966 | Oldsmobile | 442 | Base | ||
| 1964 - 1966 | Oldsmobile | Cutlass | Holiday | ||
| 1964 - 1966 | Oldsmobile | Cutlass | Base | ||
| 1964 - 1966 | Pontiac | GTO | Base | ||
| 1964 - 1966 | Pontiac | LeMans | Base |
IN STOCK BMR Suspension SP013RBMR Suspension Lowering Springs BMR 64-72 A-Body Front Lowering Springs - Red $176.84
|
IN STOCK - LOW Hotchkis 1901FHotchkis Coil Springs Hotchkis 64-72 GM A-Body Front Performance Coil Springs $215.35
|
$215.35
|
IN STOCK Belltech 2209IHBelltech Street Performance Shock Belltech SHOCK ABSORBER STREET PERFORMANCE (220998) $97.42
|
$498.96
|
$173.82
|
IN STOCK - LOW Ridetech 11227298Ridetech R-Joints Ridetech 64-77 GM A-Body and 78-88 GM G-Body Rear Upper R-Joint $145.64
|
IN STOCK KYB 343128KYB Shock & Strut Excel-G KYB Shocks & Struts Excel-G Front BUICK Skylark 1964-67 BUICK Special 1964-67 BUICK Sportwagon 1964- $60.02
|
IN STOCK - LOW BMR Suspension TRS002BMR Suspension Tie Rod Sleeves BMR 64-70 A-Body / 78-87 G-Body Tie Rod Sleeves 5/8in Thread - Black Anodized $80.70
|
IN STOCK Prothane 19-1712-BLProthane Ball Joint/Tie Rod - Blk Prothane Universal Tie Rod End Boots .590X1.375in - Black (2 pcs) $28.47
|
IN STOCK - LOW Prothane 19-408Prothane Sway/End Link Bush - Red Prothane Universal End Link Set - 4 1/4in Mounting Length - Red $48.53
|
For more information on BMR Suspension part number SP032R, you can visit the official BMR Suspension website.