SB020R BMR Suspension Sway Bar Kits

Fits 1978-1987 GM G-Bodies;Manufactured from 1.25-inch DOM steel tubing;Greaseable 88-durometer polyurethane bushings;Zinc-plated sway bar saddles;Thrust washers allow for proper location of the sway bar and prevents lateral movement;Cold-formed to better resist torsional fatigue;2-hole adjustable;Increases sway bar rate and allows for fine tuning of your G-Body's handling characteristics;Dramatically reduces body roll;Greater sway bar control allows for better handling of your vehicle;Available in red or black hammertone powder coat for long lasting good looks;1-2 hour installation time;Proudly designed in the USA!;Proudly made in the USA!. BMR's Front Sway Bar Kit (SB020) increases sway bar rate and is designed for street performance, autocross, and road racing applications..

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB020 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 1.25-inch bar stock, the SB020 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.BMR Suspension designed the sway bar for street performance, autocross, and road race applications. The SB020 front sway bar gives you a massive increase in sway bar rate. This rate increase allows you to drive harder through corners with minimal body roll. The SB020 attaches to your G-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB020 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

Product reviews for all BMR Suspension Sway Bar Kits.

There are no reviews yet.