BMR Suspension Sway Bar Kits for a 1994-1996 Chevrolet Impala SS and 1991-1996 Chevrolet Caprice.
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB006 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 32mm bar stock, the SB006 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. BMR Suspension designed the SB006 sway bar for street performance, autocross, and road race applications. The SB006 front sway bar gives you a 99% increase in sway bar rate. These rate increases and adjustability allow you to fine-tune the handling characteristics of your B-body so you can drive harder through corners with minimal body roll. The SB006 attaches to your B-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension! BMR Suspensions SB006 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.! Shipped complete with all required bushings and hardware.
| Years | Make | Model | Trim | ||
|---|---|---|---|---|---|
| 1991 - 1993 | Chevrolet | Caprice | Classic LTZ | ||
| 1991 - 1996 | Chevrolet | Caprice | Classic | ||
| 1991 - 1992 | Chevrolet | Caprice | Base | ||
| 1993 - 1994 | Chevrolet | Caprice | Classic LS | ||
| 1994 - 1996 | Chevrolet | Impala | SS |
IN STOCK Hotchkis 2206RHotchkis Swaybar Hotchkis 79-93 Chevrolet Caprice Classic 5.0L/305 Chevy Small Block Performance Rear Sway Bar Kit $441.32
|
IN STOCK - LOW UMI Performance 3634-RUMI Performance Sway Bars UMI 78-96 GM B-Body Solid Rear Sway Bar - Red $262.89
|
IN STOCK Belltech 5106Belltech Spring Set Belltech MUSCLE CAR SPRING SET 92-96 IMPALA/CAPRICE/FR 1.5inch $199.30
|
IN STOCK Energy Suspension 3.4136REnergy Suspension Body Mounts - Red Energy Suspension Chevrolet 4 door Red Body Mounts (Recommended for Police/Taxi/Race) $182.88
|
IN STOCK Energy Suspension 3.1108REnergy Suspension Trans Mounts - Red Energy Suspension Chevrolet/Oldsmobile/Pontiac/GM/Isuzu/Jeep Red Transmission Mount $59.22
|
IN STOCK Prothane 19-1712Prothane Ball Joint/Tie Rod - Red Prothane Universal Tie Rod End Boots .590X1.375in - Red (2 pcs) $28.47
|
$156.99
|
IN STOCK Hotchkis 1612Hotchkis Tie Rod Sleeves Hotchkis 71-77 GM A-Body / 77-96 GM B-Body / 70-81 GM F-Body Tie Rod Sleeves $145.94
|
IN STOCK - LOW Energy Suspension 3.9102GEnergy Suspension Bump Stops - Black Energy Suspension GM Pull Thru Style Black Bump Stop Set $34.27
|
IN STOCK - LOW SPC Performance 97130SPC Performance Control Arm SPC Performance Chevrolet Camaro / El Camino / Malibu 2nd Gen F-Body Upper Adjustable Control Arm $1,095.95
|
For more information on BMR Suspension part number SB006H, you can visit the official BMR Suspension website.