BMR Suspension K-Members for a 2005-2014 Ford Mustang.
Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S197 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. Designed for street performance, drag race, and handling applications, BMR Tubular K-members drop weight and significantly increases frontend structural rigidity. BMRs unique K-member design feature integrated engine mounts that replace the heavy factory mounts. These engine mounts lower the engine for extra underhood clearance. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 26-pounds, giving you a 20-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 75 pounds is easily achievable. BMR Suspensions KM020 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.! NOTES: - To retain the OE aero pan on 2011-2014 Mustangs, modification is necessary as the OE pieces are not a direct fit to the BMR K-Member. - BMR highly recommends its A-Arm Support Brace (AAS001) when using its Tubular K-Members for street and/or handling use. - BMR billet aluminum Motor Mount Upgrade (MM006) is recommended for applications above 700 lb-ft of torque.
| Years | Make | Model | Trim | ||
|---|---|---|---|---|---|
| 2005 - 2014 | Ford | Mustang | GT | ||
| 2005 - 2014 | Ford | Mustang | Base | ||
| 2007 - 2014 | Ford | Mustang | Shelby GT500 | ||
| 2007 - 2008 | Ford | Mustang | Shelby GT | ||
| 2008 - 2009 | Ford | Mustang | Bullitt | ||
| 2008 - 2009 | Ford | Mustang | Shelby GT500KR | ||
| 2012 - 2013 | Ford | Mustang | Boss 302 |
IN STOCK - LOW BMR Suspension KM018HBMR Suspension K-Members BMR 05-14 S197 Mustang K-Member w/ STD. Motor Mounts and STD. Rack Mounts - Black Hammertone $699.95
|
IN STOCK BMR Suspension KM020RBMR Suspension K-Members BMR 05-14 S197 Mustang K-Member w/ 1/2in Lowered Motor Mounts and STD. Rack Mounts - Red $699.95
|
IN STOCK - LOW ACT FM13-HDSSACT HD/Perf Street Clutch Kits ACT 2011 Ford Mustang HD/Perf Street Sprung Clutch Kit $611.00
|
IN STOCK McLeod Racing 6435807HDMcLeod Racing RXT Twin Clutch Kits McLeod RXT 1200 Twin Disc Clutch Kit w/ 8 Bolt Flywheel 164T - 1-1/8in x 26 Spline Input Trans $1,495.00
|
IN STOCK Ford Racing M-4033-G2Ford Racing Differential Install Kits Ford Racing 8.8inch Axle Girdle Cover Kit $280.62
|
IN STOCK Ford Racing M-4209-88331Ford Racing Ring and Pinion Sets Ford Racing 8.8in 3.31 Ring Gear and Pinion $241.87
|
IN STOCK - LOW aFe 46-71410AaFe Diff/Trans/Oil Covers aFe 90-14 Ford F-150 Rear Differential Cover - Raw w/ Machined Fins $292.55
|
IN STOCK McLeod Racing 6912-25McLeod Racing RST Twin Clutch Kits McLeod RST Clutch 2011-2012 Mustang Gt 1in X 23 Metric Spline $925.00
|
IN STOCK - LOW Exedy ET05SRFDExedy Stage 4 Clutch Kits Exedy 2011-17 Mustang 5.0L Organic 23 Teeth 8 Bolt Twin Disc Clutch $1,270.90
|
IN STOCK - LOW Yukon Gear & Axle YPKF8.8-PC-LYukon Gear & Axle Positraction Internals Yukon Gear 8.8in Ford Tracloc Clutch Set / Both Sides $251.89
|
For more information on BMR Suspension part number KM020H, you can visit the official BMR Suspension website.