BMR Suspension Diff Bushing Kits (BK063) for a 2016-2020 Chevrolet Camaro. BMR 16-17 6th Gen Camaro Rear Cradle Lockout Bushing Kit - Black.
Years | Make | Model | Trim | ||
---|---|---|---|---|---|
2016-2020 | Chevrolet | Camaro | SS | ||
2016-2020 | Chevrolet | Camaro | LT | ||
2017-2020 | Chevrolet | Camaro | LS | ||
2017-2020 | Chevrolet | Camaro | ZL1 | ||
2020-2020 | Chevrolet | Camaro | LT1 |
Reduce Wheelhop, bushing deflection, and cradle movement on your 2016-newer Chevrolet Camaro with a Cradle Bushing Lockout Kit from BMR Suspension. Built from CNC-machines Delrin, laser-cut stainless steel, and billet aluminum, BMR?s BK063 Cradle Bushing Lockout Kit is designed to greatly reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR?s BK063?s Delrin upper bushing inserts are CNC-machined and specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum ?bullet? inserts. The kit is finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. By filling the voids in the bushings, deflection is greatly reduced, allowing more power and torque to be transferred to the ground instead of being absorbed by the chassis. BMR Suspension designed the BK063 Cradle Bushing Lockout Kit for street performance, drag race, and handling applications. This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH. (During BMR?s testing, no change in NVH was observed without accompanying modifications.) BMR Suspension?s BK063 Cradle Bushing Lockout Kit is the only part you need to affordably and effectively lessen wheelhop, bushing deflection, and cradle movement. Throughout testing, BMR has seen about an 80%-90% reduction in fore/aft and lateral cradle bushing deflection. A car with no other mods and stock tires that isn?t driven overly hard is going to see a 90% or higher reduction, while a more race oriented Camaros with sticky tires will see slightly less of a reduction. Launching the test vehicle at over 7,000 rpm on drag radials, BMR saw about an 80% reduction in bushing deflection.
IN STOCK BMR Suspension BK061BMR Suspension Diff Bushing Kits BMR 16-17 6th Gen Camaro Rear Cradle Bushing Kit (Polyurethane) - Red $219.95
|
IN STOCK BMR Suspension BK062BMR Suspension Diff Bushing Kits BMR 16-17 6th Gen Camaro Rear Cradle Bushing Kit (Delrin) - Black $549.95
|
IN STOCK - LOW BMR Suspension BK059BMR Suspension Diff Bushing Kits BMR 16-17 6th Gen Camaro Differential Bushing Kit (Aluminum) - Black $192.02
|
IN STOCK BMR Suspension BK058BMR Suspension Diff Bushing Kits BMR 16-17 6th Gen Camaro Differential Bushing Kit (Polyurethane) - Red $114.36
|
IN STOCK BMR Suspension BK060BMR Suspension Diff Bushing Kits BMR 16-17 6th Gen Camaro Differential Lockout Bushing Kit (Aluminum) - Black $249.95
|
IN STOCK McLeod Racing 6306807MMcLeod Racing RXT Twin Clutch Kits McLeod RXT Clutch 12-15 Camaro ZL1 Aluminum Flywheel 8 Bolt $1,400.00
|
IN STOCK - LOW McLeod Racing 6306807HDMcLeod Racing RXT Twin Clutch Kits McLeod RXT HD Twin Clutch LSA 9-11/16 x 1-1/8 x 26 Spline Sprung Hub 8 Bolt Modular Assy w/Alum Fly $1,600.00
|
IN STOCK McLeod Racing 6406807McLeod Racing RST Twin Clutch Kits McLeod RST Street Twin Steel Cad LSA 1-1/8 X 26 Spl Org 168 teeth $1,450.00
|
IN STOCK McLeod Racing 6406807HDMcLeod Racing RXT Twin Clutch Kits McLeod RXT HD Twin GM LSA /LT4 1-1/8 x 26 Spline w/ 168T 8 Bolt Steel Flywheel $1,800.00
|
IN STOCK BMR Suspension DSL019RBMR Suspension Driveshaft Loops BMR 16-17 6th Gen Camaro Front Driveshaft Safety Loop - Red $136.58
|
IN STOCK McLeod Racing 6406807MMcLeod Racing RXT Twin Clutch Kits McLeod RXT Street Twin Steel Cad LSA 1-1/8 X 26 Spl Org MODular Assy 168 $1,680.00
|
IN STOCK - LOW BMR Suspension DSL019HBMR Suspension Driveshaft Loops BMR 16-17 6th Gen Camaro Front Driveshaft Safety Loop - Black Hammertone $136.58
|
For more information on BMR Suspension part number BK063, you can visit the official BMR Suspension website.