Torque Solution Performance Parts
For more information on Torque Solution products you may visit the Torque Solution website.
Torque Solution Cooling:
Radiator Mounts
Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately...
Torque Solution Drivetrain:
Drivetrain Accessories
Torque Solution Counter Shift Weight was designed to rid your Mazdaspeed of that heavy oem counter weight. By reducing the weight by more than 75% this will give your shifter a direct feel. This also...
Drivetrain Bushings
Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with billet aluminum pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T&rsquo...
These Solid Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock...
Torque Solution continues to push the limits of high performance aftermarket products with our NEW Transmission Member Bushings. Developed to perform under the most extreme conditions, our Urethane Components...
Shifter Bushings
Torque Solution continues to push the limits of high performance aftermarket products with our ‘NEW’ Positive Shift Kit. Developed to perform under the most extreme conditions, our Urethane...
Torque Solution shifter base bushing kit replaces the OEM rubber bushings on the bottom of the shifter providing a more stable shifter platform and mounting points. This yeilds improved shifting feel...
Torque Solution continues to push the limits of high performance aftermarket products with our “NEW” Shock Factor Shifter Bushings. Developed to perform under the most extreme conditions,...
Torque Solution continues to push the limits of high performance aftermarket products with our “NEW” Shock Factor Shifter Bushings. Developed to perform under the most extreme conditions,...
Short Shifters
Torque Solution Shifter Extensions are used to raise the gear shift knob to provide a better arm angle for more precise and comfortable shifting. Longer shift levers are commonly used in race applications...
orque Solution Short Shifters are Made from 4130 Chromoly steel and are tig welded in a precision jig.After this they are set out to be chrome plated to last a lifetime warranty.Features: 27~...
Torque Solution Engine:
Engine Accessories
For Subaru STI equipped with air pump. For use when deleting the OE air pump system on race and track cars. Includes two, sold billet aluminum plates, Anodized and Lazer Ingraved Torque Solution with...
Delete your factory EGR with our Billet EGR Block off plate.. These come with countersunk recessed screws for a nice clean look. Installs in under 15 minutes Made out of lightweight 6061-T6 billet...
his part is used for mounting the cam angle sensor to the front of Non North American Spec STi cylinder heads. Perfect for adapting USDM cylinder heads to Japanese and European market engines or...
Quick connect fitting Male 5/16” size to -6 AN Female. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fitting found on many newer FUEL systems and emissions...
Motor Mounts / Inserts
Torque Solution is proud to announce our new billet engine mounts. These mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high...
With Torque Solution engine mounts you will see and feel a difference in your vehicle. These mounts are made out of high grade billet aluminum material and steel. You can rest assure that with our superior...
These are Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Caliber engine mounts. Made from 60 durometer polyurethane. Each mount includes 2 half&rsquo...
Torque Solution Exhaust:
Exhaust Accessories
Universal O2 BungStainless Steel 18mm X 1.5 Weld-on 02 bung for adding Oxygen sensors to your exhaust. 304 Stainless Steel Life Time Warranty Made in USAUniversal O2 ExtenderOn ODB-II vehicles...
Exhaust Bushings
Torque Solution exhaust mounts are made from a high grade Urethane.Our exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment...
Torque Solution exhaust mounts are made from a high grade Urethane.Our exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment...
Torque Solution Exterior:
Antennas
Replace your long factory antenna with our billet shorty antenna,Giving you a new style to your car. Machined from T-6061 Billet aluminum for a great fit and great look.
Torque Solution Forced Induction:
Intercoolers
Performance gains include much quicker engine acceleration and increased top end power. Boost builds much faster than stock with the free breathing large diameter intake piping and free flowing intercooler...
Oil Lines
Universal T3/T4 & PTE Turbo Drain FlangeBillet aluminum oil drain / return flange for T3, T3/T4, or T04 turbochargers. Designed to be used with 8mm thread x 1.25 pitch bolts to bolt to turbo. Flange...
Turbo Accessories
Torque Solution Billet Tial 50mm Blow off Valve Weld on Flange ONLY. No Clamp or O-ring. CNC machined 6061-T6 billet aluminum or stainless steel Direct Fitment Lifetime Warranty Made in USA...
The Torque Solution boost tap was designed to simplify installing your boost gauge, boost controller or any device that requires a vacuum / boost reference. This piece allows you to install your part...
Torque Solution BOV Adapter.
Torque Solution Stainless Steel wastegate flanges.Features: 304 Stainless Steel Made in USA Lifetime Warranty
Torque Solution Fuel:
Fuel Pumps
Run out of Fuel on your Evo X and need more fuel pump?? Here is the answer to your fuel issues.. We have designed a 6061 Billet Fuel Pump Holder to accept Walbro 255lph pumps along with Aeromotive...
Torque Solution Intake:
Couplers
Torque Solution continues to push the limits of high performance aftermarket products with our 4ply Silicone Post Maf Intake Hose. The factory intake hose is corrugated and causes air turbulence upon...
Torque Solution Suspension:
Alignment / Camber Kits
Torque Solution Porsche 996/997 Cayman & Boxter Rear Toe Links will help restore the proper suspension geometry for lowered vehicles.. The factory control arm do not have the adjustment range needed...
Bushings
Torque Solution adjustable thrust arm bushing kit replaces the factory, rubber bushings on the wheel-end of the control arms with a billet aluminum bushing, this will allow for better handling and most...
Torque Solution polyurethane control arm bushings replace the inner rubber material that over time deteriorates and fails. Leaving you with a sloppy, squeaky suspension. Made from 75a durometer polyurethane...
Torque Solution steering rack bushings were designed as direct replacements, these high quality, polyurethane bushings replace the factory rubber units to help give a more direct steering feel. These...
Torque Solution Subframe Bushings.
Suspension Arms
Torque Solution Front Swaybar Drop Links are designed to eliminate the failure prone factory endlinks and allow for stiffer swaybar adjustments. This gives you more control of your suspension adjustments...
Torque Solution Rear Dogbone Kit is designed to correct the rear suspension geometry on your lowered Porsche 996/997. If you are experiencing uneven tire wear due to too much camber this kit will help...