South Bend Clutch KHC05 HD O Stage 2 Clutch Kit
South Bend Clutch Stage 2 Clutch Kit (KHC05 HD O) for a Acura and Honda. Stage 2 - Intended Use: DAILY - Torque Rating ft/lbs: 225 | Stage 2 - Intended Use: DAILY - Torque Rating ft/lbs: 200 | Stage 2 - Intended Use: DAILY - Torque Rating ft/lbs: 190.
|South Bend ST2 DAILY Clutch Kit For 94-97 Honda Del Sol 1.6L KHC05-HD-O
ebay - Ends 03/22/2020
|South Bend / DXD Racing Clutch for 92-00 Honda Civic SI D16Z6/B16A2 1.6L Stg 2 D
ebay - Ends 02/29/2020
|South Bend ST2 DAILY Clutch Kit For 94-01 Acura Integra 1.8L KHC05-HD-O
ebay - Ends 03/12/2020
| NOTES: |
Stage 2 - Intended Use: DAILY - Torque Rating ft/lbs: 225 | Stage 2 - Intended Use: DAILY - Torque Rating ft/lbs: 200 | Stage 2 - Intended Use: DAILY - Torque Rating ft/lbs: 190
|1994 - 2001||Acura||Integra||1.8 / L4 See Notes Above|
|1992 - 2000||Honda||Civic||Si B16A2||4 / 1.6 See Notes Above|
|1994 - 1997||Honda||Del Sol||Vtec / B16A3 / B16A2||4 / 1.6 See Notes Above|
See partnumber notes and applications notes above for specific product information.
STAGE 2 DAILY:
Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability.
Recommended usage is daily, street and moderate race.
STAGE 2 ENDURANCE:
An SFI approved single mass flywheel is recommended for this application to get optimal performance. This clutch system is designed for the racing climate. The pressure plate is precision balance for vibration free operation at high RPM. The pressure plate fulcrum is altered for a positive disengagement and a quick shift. The disc is engineered with a Dual Damped design to provide accurate control when accelerating through corners. The friction material is a hybrid using a full face Feramic (Sintered Iron) lining on the flywheel side and a high metal content Organic lining on the pressure plate side. Engagement is positive yet buffered due to the high graphite content unique to Feramic facings.
Recommended uses are daily and street with an emphasis on Rally and Endurance racing.
STAGE 2 DRAG:
Drag racing requires a Single Mass SFI approved Flywheel to be included with each kit when the original design is Dual Mass. This system features a Heavy Duty Pressure Plate modified for a puck style disc with no cushion between the linings to keep the clutch pedal travel short and quick. The puck design disc reduces rotational mass and total drive surface area while increasing pounds per square inch on the surface of the friction material. This combination minimizes inertia, accelerating the transfer of torque from the engine to the wheels. The friction material used for this race application is Graphite Impregnated Ceramic. This compound exceeded all other friction materials when testing for durability, reduced chatter, heat transfer and torque capacity.
Recommended uses are drag racing, drifting and limited street.
WARNING: Cancer & Reproductive Harm www.p65warnings.ca.gov
There are currently no reviews. Be the first by reviewing below.
Write a Review:
Click here to contact us with your question regarding South Bend Clutch Stage 2 Clutch Kit (KHC05 HD O).
- HKS Light Action Clutch Kit
- Exedy Racing Stage 1 Organic Clutch Kit
- Competition Clutch Stage 3 - Street/Strip Series 2600 Clutch Kit
- Yonaka Stage 3 Clutch Kit
- Competition Clutch Domestic Stage 1 - 2200 Brass Plus
- ACT Solid 6 Puck Clutch Kit
- Competition Clutch Twin Disc Assembly
- South Bend Clutch Stage 3 Clutch Kit
- Competition Clutch Domestic Stage 3 - 2250 Brass Plus/Cerametalic
- Yonaka OEM Replacement Clutch Kit