Skunk2 Racing Cold Air Intake (343-05-0100) for a 2006-2011 Honda Civic Si. Skunk2 06-11 Honda Civic Si Composite Cold Air Intake.
Years | Make | Model | Trim | ||
---|---|---|---|---|---|
2006-2011 | Honda | Civic | Si |
Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the ’06-11 Civic Si. The results are the best performing, best fitting intake system available. Skunk2’s Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5-inch internal diameter lower tube and a tapered, 3.5-inch to 3.0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don’t utilize MAF sensors. In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2’s design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors’ designs that locate the air filter from the side. That, combined with a design that doesn’t require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions. Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2’s unique design and brackets allow for the OEM battery to be retained.
IN STOCK Mishimoto MMAI-CIV-06SIHWBKMishimoto Air Intakes Mishimoto 06-11 Honda Civic Si Performance Air Intake w/ Heat Shield - Wrinkle Black $324.95
|
IN STOCK aFe TR-1004BaFe Takeda Intake aFe Takeda Intakes Stage-2 PDS AIS PDS Honda Civic Si 06-11 L4-2.0L (blk) $261.53 SALE
|
IN STOCK Injen SP1577BLKInjen SP Intake Injen 06-09 Civic Si 2.0L 4Cyl. Coupe & Sedan Black Short Ram Intake $349.95
|
IN STOCK Injen SP1570PInjen SP Intake Injen 06-11 Honda Civic Ex 1.8L 4cyl Polished Tuned Air Intake w/ MR Tech/Nano-Fiber Dry Filter $301.95
|
IN STOCK Injen SP1577PInjen SP Intake Injen 06-09 Civic Si 2.0L 4Cyl. Coupe & Sedan Polished Short Ram Intake $349.95
|
IN STOCK Weapon R 301-159-101Weapon R Secret Weapon Intake Weapon R 06+ Civic LX/DX/EX Secret Weapon Intake $199.62 SALE
|
IN STOCK Injen SP1580BLKInjen SP Intake Injen 06-11 Honda Civic Hybrid 1.3L 4 cyl Black Dyno-Tuned Air Intake w/ Web Nano-Fiber Filter $305.95
|
IN STOCK Injen SP1569PInjen SP Intake Injen 06-09 Civic Ex 1.8L 4 Cyl. (Manual) Polished Cold Air Intake $413.95
|
IN STOCK Skunk2 Racing 309-05-0010Skunk2 Racing Throttle Body Adapters Skunk2 06-11 DBW Throttle Body Adapter for Ultra-Series Race Manifold |
IN STOCK Skunk2 Racing 309-05-0025Skunk2 Racing Throttle Body Adapters Skunk2 90mm K Series Throttle Body Adapter |
IN STOCK - LOW Grams Performance G09-99-3130Grams Performance Silicone Coupler Grams Performance 3.15in to 3.00in Silicone Reinforced Reducer Coupler for 72mm Throttle Body $31.89
|
IN STOCK Skunk2 Racing 943-05-0200Skunk2 Racing Throttle Body Adapters Skunk2 06-15 Honda Civic Cold Air Intake Replacement MAF Coupler |
IN STOCK Skunk2 Racing 943-05-0100Skunk2 Racing Throttle Body Adapters Skunk2 07-11 Honda Civic Si Big-Bore Throttle Body Cold-Air Intake Coupler (84mm to 90mm) |
For more information on Skunk2 Racing part number 343-05-0100, you can visit the official Skunk2 Racing website.