Megan Racing Euro II Series Coilovers Sale


Megan Racing Euro II Series Coilovers image 1
General product image. Actual product may vary from image(s).
Category: Coilovers
Product Review: 0 Star Rating

The Euro II Series is our new Luxury Package based off of our Street-Series coil-over line-up using similar specifications and design, but offering a more conservative spring and damper setup for a more comfortable ride, yet still providing a sporty feel and control.

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.

Compression and rebound settings are easily adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.

Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.

On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

  • 32 Levels of Damper Force Adjustment
  • Rubber Dust Boots
  • Adjustable Ride Height
  • Aggressive Spring Rates
  • Single-Cylinder Design
  • Aluminum Brackets
  • All coil-over damper kits come with 1-year manufacturer-defect warranty.

 

For more information on this product you may visit the Megan Racing website.

View All

Latest News:



Applications:


Part Number

 

Buy

Audi
Audi A3
2014-2016 Audi A3 (AWD) (NOTE: Rear OEM top hat bushings (1 per side) must be re-used on rear shocks. Bushings are glued to OEM washers / and need to be carefully removed without tearing.)

Spring Rates: F: 8 kg/mm R: 6 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-AA314-AW
Audi S3
2014-2016 Audi S3 (AWD) (NOTE: Rear OEM top hat bushings (1 per side) must be re-used on rear shocks. Bushings are glued to OEM washers / and need to be carefully removed without tearing.)

Spring Rates: F: 8 kg/mm R: 6 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-AA314-AW
BMW
BMW 1-Series
2008-2013 BMW 1-Series (E82)

Spring Rates: F: 8 kg/mm R: 12 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E82
BMW 1M
2011-2011 BMW 1M (E82 Coupe) (NOTE: Rear OEM top mounts are to be re-used.)

Spring Rates: F: 9kg/mm R: 14kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E821M
BMW 3-Series
1984-1991 BMW 3-Series (E30 with 45mm Front Strut outer diameter. Does not fit E30 M3 or AWD models.) (NOTE: All 6-cylinder E30 models (3-series 84-91)and the 90-91 318i/is/ic models (with the M42 4-cylinder) use the larger front strut diameter. For US models / only the 84-85 318i models use the smaller size strut tube. Usage of lower offset aftermarket front wheels is recommended. If stock front wheels are used with this coil-over system / 0.5 inch wheel spacers are recommended for clearance. Need to re-use the OEM front spindles and TIG or MIG weld with the front struts.)

Spring Rates: F: 10kg/mm R: 8kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
1984-1991 BMW 3-Series (E30 with 51mm Front Strut outer diameter. Does not fit E30 M3 or AWD models.) (NOTE: All 6-cylinder E30 models (3-series 84-91)and the 90-91 318i/is/ic models (with the M42 4-cylinder) use the larger front strut diameter. For US models / only the 84-85 318i models use the smaller size strut tube. Usage of lower offset aftermarket front wheels is recommended. If stock front wheels are used with this coil-over system / 0.5 inch wheel spacers are recommended for clearance. Need to re-use the OEM front spindles and TIG or MIG weld with the front struts.)

Spring Rates: F: 10kg/mm R: 8kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E3051
1992-1998 BMW 3-Series (6-cylinder including the M3 model (e.g. will not fit 318ti model))

Spring Rates: F: 8 kg/mm R: 8 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E36
1999-2005 BMW 3-Series (E46 excluding AWD and M3 models)

Spring Rates: F: 7 kg/mm R: 8 kg/mm

DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E46
2006-2011 BMW 3-Series (E90 4 Dr Sedan - Does not fit XI model) (Please remove rear top OEM cup prior of coilover installation)

Spring Rates: F: 7 kg/mm R: 11 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
2006-2012 BMW 3-Series (E92 2Dr Coupe - Does not fit XI model or M3 models - E93 convertible - Does not fit XI model or M3 models - E92 2Dr Coupe - Does not fit XI model or M3 models - E93 convertible - Does not fit XI model or M3 models - E92 2Dr Coupe - Does not fit XI model or M3 models - E93 convertible - Does not fit XI model or M3 models - E92 2Dr Coupe - Does not fit XI model or M3 models - E93 convertible - Does not fit XI model or M3 models) (Please remove rear top OEM cup prior of coilover installation)

Spring Rates: F: 8 kg/mm R: 12 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
2012-2016 BMW 3-Series (320i / 328i / 335i Sedan F30 (Non M models) RWD only) (Note: Do not fit F30 equipped with Dynamic Handling Package (Adaptive M Suspension - EDC). Some OEM parts like rubber bushing may need to be reused for complete installation)

Spring Rates: F: 6 kg/mm R: 12 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BF30
BMW 318ti
1994-1998 BMW 318ti

Spring Rates: F: 6 kg/mm R: 6 kg/mm

DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E36TI
BMW 4-Series
2014-2016 BMW 4-Series (428i / 435i F32 (Non M models) RWD only) (Note: Do not fit F32 equipped with Dynamic Handling Package (Adaptive M Suspension - EDC). Some OEM parts like rubber bushing may need to be reused for complete installation)

Spring Rates: F: 6 kg/mm R: 12 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BF30
BMW 5-Series
1989-1995 BMW 5-Series (E34 Does not fit AWD models.) (NOTE: Need to re-use the OEM front spindles and TIG or MIG weld with the front struts. Usage of lower offset aftermarket front wheels is recommended. If stock front wheels are used with this coil-over system / 0.5 inch wheel spacers are recommended for clearance.)

Spring Rates: F: 7kg/mm R: 6kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E34
1997-2003 BMW 5-Series (E39 - Excluding E39 Wagon / M5 models / Any model originally equipped with airbag suspension) (NOTE: V8 owners may want to consider stiffer spring rates / particularly in the front end to account for the 300lb weight difference between 6 Cyl and 8 Cyl applications. Revisions to this application may ensue to make a permanent spring rate change. 3/2/2012)

Spring Rates: F: 6 kg/mm R: 5 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
BMW 6-Series
2013-2016 BMW 6-Series (Gran Coupe)
IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BF06
BMW M235i
2014-2015 BMW M235i (F22) (NOTE: DO NOT work with Electronic Damper Control / Adaptive M Suspension / ECU will restrict Sport / Sport+ or ECO mode. Aftermarket EDC-delete module has to be purchased separately for vehicle equipped with EDC / Adaptive M Suspension.)

Spring Rates: F: 8 kg/mm R: 14 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BF22
BMW M3
1992-1998 BMW M3

Spring Rates: F: 8 kg/mm R: 8 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E36
2001-2006 BMW M3 (NOTE: Front wheel offset must be less than +38mm on an 8 inch wide wheel. Re-use OEM lower rubber piece beneath rear springs with this kit)

Spring Rates: F: 8 kg/mm R: 10 kg/mm

DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E46M3
2008-2013 BMW M3 (E90/E92/E93) (NOTE: OEM rear top mounts are to be re-used.)

Spring Rates: F: 8 kg/mm R: 12 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E92M3
2015-2016 BMW M3 (F80 (3 Bolt Front Tophat)) (NOTE: DO NOT work with Electronic Damper Control / Adaptive M Suspension / ECU will restrict Sport / Sport+ or ECO mode. Aftermarket EDC-delete module has to be purchased separately for vehicle equipped with EDC / Adaptive M Suspension.)

Spring Rates: F: 7 kg/mm R: 14 kg/mm

DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BF82
2015-2016 BMW M3 (F80 (5 Bolt Front Tophat)) (DOES NOT WORK WITH ELECTRONIC DAMPER CONTROL)

Spring Rates: F: 7 kg/mm R: 14 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BF82-V2
BMW M4
2015-2016 BMW M4 (F82 (3 Bolt Front Tophat)) (NOTE: DO NOT work with Electronic Damper Control / Adaptive M Suspension / ECU will restrict Sport / Sport+ or ECO mode. Aftermarket EDC-delete module has to be purchased separately for vehicle equipped with EDC / Adaptive M Suspension.)

Spring Rates: F: 7 kg/mm R: 14 kg/mm

DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BF82
2015-2016 BMW M4 (F82 (5 Bolt Front Tophat)) (DOES NOT WORK WITH ELECTRONIC DAMPER CONTROL)

Spring Rates: F: 7 kg/mm R: 14 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BF82-V2
BMW M6
2014-2016 BMW M6 Gran Coupe (sedan only EXCLUDES 2dr)
DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BF06M6
BMW X1
2013-2016 BMW X1 (E84 X1 Compact SUV. Does not fit X-Drive) (NOTE: Rear OEM top hat bushings (1 per side) must be re-used on rear shocks. Bushings are glued to OEM washers / and need to be carefully removed without tearing.)

Spring Rates: F: 7 kg/mm R: 11 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E84
BMW Z4
2002-2008 BMW Z4 (excludes M-models) (NOTE: Rear top mounts do not use pillow ball mounts to avoid excess suspension noise.)

Spring Rates: 8kg/mm Front / 11kg/mm Rear

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-E85
2009-2016 BMW Z4 (E89) (NOTE: DO NOT work with Electronic Damper Control / Adaptive M Suspension / ECU will restrict Sport / Sport+ or ECO mode. Aftermarket EDC-delete module has to be purchased separately for vehicle equipped with EDC / Adaptive M Suspension.)

Spring Rates: F: 7 kg/mm R: 12 kg/mm

DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-BE89
Mercedes
Mercedes C63 AMG
2008-2014 Mercedes C63 AMG (sedan) (Note: Front OEM top mounts are required and reused for installation)

Spring Rates: F: 7 kg/mm R: 15 kg/mm

DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-W204C63
Mercedes CLA250
2014-2016 Mercedes CLA250 (FWD Only (Do Not fit CLA45)) (NOTE: Front OEM top mounts (top hat and bearing plate) are to be re-used.)

Spring Rates: F: 7 kg/mm R: 7 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-MBC117
Mercedes SLK
2004-2010 Mercedes SLK (SLK AMG / SLK230 / SLK280 / SLK300 / SLK350 / SLK55 AMG) (NOTE: OEM rear top hats must be re-used.)

Spring Rates: Front: 6kg/mm Rear: 11kg/mm

DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-MBR171
Mini
Mini Cooper
2002-2006 Mini Cooper (Excluding JCW) (NOTE: 2-3mm spacers may be needed for clearance against the lower locking ring-- necessity is based on wheel width/offset and tire size. **JCW needsMC08 rear lower brackets)
IN-STOCK - DROP SHIPS FROM MANUFACTURER
2007-2013 Mini Cooper (R56) (NOTE: 2-3mm spacers may be needed for clearance against the lower locking ring-- necessity is based on wheel width/offset and tire size.)

Spring Rates: F: 6 kg/mm R: 6 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-MC08
Mini Cooper Countryman
2011-2013 Mini Cooper Countryman (Fit Mini Countryman R60 2011+ / Mini Paceman R61 2013+ / John Cooper Works 2013+ (Countryman/Paceman) Fit both FWD and AWD) (NOTE: 2-3mm spacers may be needed for clearance against the lower locking ring-- necessity is based on wheel width/offset and tire size. This kit reuses the OEM rear top hats)

Spring Rates: F: 7 kg/mm R: 8 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-MCC11
Saab
Saab 9-3
2003-2010 Saab 9-3 ((YS3F chassis code) sedan/convertible/wagon / FWD and AWD models)

Spring Rates: F: 8 kg/mm R: 6 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-S9306
Volkswagen
Volkswagen Golf
1993-1998 Volkswagen Golf (NOTE: Please remove rear top OEM cup prior of coilover installation)
DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-GOLF3
2015-2016 Volkswagen Golf GTI (For vehicles with 50mm strut diameter / torsion beam rear axle / and without electronic suspension.)

Spring Rates: F: 7 kg/mm R: 6 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-VWG750
2015-2016 Volkswagen Golf GTI (Fits vehicles with 55mm oustide strut diameter / with multi-link rear axle and without electronic suspension.)

Spring Rates: F: 7 kg/mm R: 6 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-VWG755
Volkswagen GTI
2006-2014 Volkswagen GTI (MK5 / MK6) (NOTE: Please remove rear top OEM cup prior of coilover installation)
IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-GOLF5
Volkswagen Jetta
1993-1998 Volkswagen Jetta (NOTE: Please remove rear top OEM cup prior of coilover installation)
DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-GOLF3
Volkswagen Passat
2012-2015 Volkswagen Passat (Note: Depending on ride height customers may encounter a noise which will come from these two components touching. (See image) If the car is too low the angle of the tie rod changes and tie rod boot will hit inner wheel well trim. Modification of trim will be required if customers intend to go any lower than 1 past stock ride height. Rear OEM top hat bushings (1 per side) must be re-used on rear shocks.)

Spring Rates: F: 7 kg/mm R: 6 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-VWP12
Volkswagen Rabbit
1974-1983 Volkswagen Rabbit (MK1) (NOTE: Rear OEM top hat bushings (will not work with aftermarket replacement poly or hardened rubber bushing) and centering sleeves must be re-used on rear shocks.In order to lower the car any further will require a custom exhaust system that clear the rear swing arm.)

Spring Rates: F: 5 kg/mm R: 3 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-VWR74
Volvo
Volvo C30
2008-2013 Volvo C30 Hatchback

Spring Rates: F: 7 kg/mm R: 4 kg/mm

IN-STOCK - DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-VC30
Volvo S40
2005-2011 Volvo S40 (FWD Only)

Spring Rates: F: 7 kg/mm R: 5 kg/mm

DROP SHIPS FROM MANUFACTURER
Megan Racing Euro II Series Coilovers MR-CDK-VS405

Don't see your application? We probably have it or can get it, click here.



Reviews:

There are currently no reviews. Be the first by reviewing below.


Write a Review:

Submit 1 Star Rating
Submit 2 Star Rating
Submit 3 Star Rating
Submit 4 Star Rating
Submit 5 Star Rating