K-Tuned 9200-TB-102 (ETD Racing) Traction Bar 92-00 Honda Civic 94-01 Acura Integra
Fitment Information for K-Tuned 9200-TB-102:
| NOTES: |
94-01 DC Integra all models /92-95 EG Civic / 96-00 EK Civic (excluding U.S.A Si and Canadian SIR DOHC cars, welding required)
|1994 - 2001||Acura||Integra||See Notes Above|
|1992 - 2000||Honda||Civic||See Notes Above|
K-Tuned (ETD Racing) Traction Bar 9200-TB-102 for a 1992 1993 1994 1995 1996 1997 1998 1999 2000 Honda Civic and 1994 1995 1996 1997 1998 1999 2000 2001 Acura Integra - 94-01 DC Integra all models /92-95 EG Civic / 96-00 EK Civic (excluding U.S.A Si and Canadian SIR DOHC cars, welding required) .
These bars are the strongest ETD makes and the best in the industry. We use only the best high-grade steel and chromoly in the construction and the strongest hardware money can buy. These bars are designed for high hp street and track dedicated cars.
Engineered from extensive track testing and racing, ETD Racing Traction bars are developed to improve traction and handling. ETD Racing Traction Bars bolts on to your factory tow hook mounting locations. We don’t just sell these bars we use them on our race cars.
Components are CNC machined and laser cut from 1/4" steel and finished with a durable powder coating. The radius arms are thick walled polished aluminum to ensure a strong and solid arm to prevent from fatigue and breakage. With the versatility of the radius arms, fitment is perfect every time and adjustability is only a twist away. The Main bar is made from Chromoly and the end plates from the best high-grade steel available.
- Does not interfere with stock rad points.
- Full Bolt on installation
- Perfect for Street cars & Full Race Applications
NOTE ABOUT 99-00 DOHC CIVIC: Does not fit 99-00 DOHC Civic models (Si & SIR). To make them fit, you need to weld the plate on to the control arm that is normally bolted on all the other models. This does work and has been done, but because it’s not "bolt on" we say it doesn’t fit, though technically it will if you have access to a welder.
- Gen 3 Bars, fully new design to completely eliminate any failures
- Aluminum Swaged radius arms (stronger and better)
- Tig and Mig welded for the best strength
- New double rod end (heim joints) on each end of the radius arm
- Control arm mounting tabs
- Full mounting hardware package included
- Gen 3 bars are stronger all around
- New ultra tough powder coating, the strongest and thickest ever
- New high quality packaging so it gets to you in tip top condition
Write a Review:
Click here to contact us with your question regarding K-Tuned (ETD Racing) Traction Bar (9200-TB-102).
- H&R Sport Sway Bars
- Whiteline Chassis Bracing
- Megan Racing Strut Bar
- AVO Stabilizer Bars
- Perrin Strut Tower Braces
- DC Sports Chassis Under Brace
- AVO Underbody Brace
- Whiteline Sway Bar Links
- Megan Racing Sway Bar
- Tanabe Sustec Strut Tower Bar
- Skunk2 Rear Lower Arm Bar
- Megan Racing Race Spec Strut Bar
- Whiteline Sway Bar
- Godspeed Project Anti-Sway Bar
- Blackworks BWR Rear Tie Bar
- ST Suspension Anti-Sway Bars
- Megan Racing Lower H-Brace
- Blackworks BWR Rear Subframe Brace
- Private Label Mfg Crossbar (x-bar)
- Perrin Swaybars
- Whiteline Sway Bar Mounts
- Progress Technology Anti-Roll Bars
- DC Sports Carbon Steel Strut Tower Bar
- Skunk2 Strut Tower Bar
- Eibach Anti Roll Kit
- Whiteline Strut Tower Bar
- Blox Racing Sway Bars
- Tanabe Sustec Stabilizer Sway Bar
- Whiteline Strut Tower Quick Release Clamp
- Tanabe Sustec Under Brace
- Skunk2 Phi Fifty Rear Lower Arm Bars
- Radium Strut Tower Bar