Edelbrock Victor Intake Manifold (28001) . Edelbrock Manifold Big Victor II BBC w/ Edelbrock Profiler or Dart Big Chief Heads Dominator Flange.
Years | Make | Model | Trim | ||
---|---|---|---|---|---|
Sorry we do not have fitment information available for this part number. Contact us for any fitment questions. |
BIG VICTOR SPREAD-PORT (3500-8500 RPM) Designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, these manifolds have an average runner area of approximately 4.75 sq. in. The port exits have .090" per side reduction to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. Big Victor High-Rise intake manifolds are based on our popular Big Victor designs, but have been modified to meet the needs of custom porting specialists. The casting has added material on the top of the runner and exterior area of the carb pad. This gives engine builders the extra material they need to apply custom porting without welding. Big Victor 2 intake manifolds go one step further. They have the same outer dimensions as the Big Victor High-Rise, but also have an extended runner design, carb pad and plenum for increased air flow and performance in large displacement race engines. These intake manifolds are designed to perform right out-of-the-box with minimum modifications, but can still be ported as needed. Port matching is required for best results. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.
$201.61
|
$356.95
|
IN STOCK - LOW Edelbrock 2040Edelbrock Performer Intake Manifold Edelbrock Manifold Installation Kit Performer Eps SBC 1957-1986 Natural Finish $285.84
|
IN STOCK - LOW Edelbrock 2021Edelbrock Performer Intake Manifold Edelbrock Manifold And Carb Kit Performer Eps Small Block Chevrolet 1957-1986 Natural Finish $790.95
|
$1,152.95
|
IN STOCK - LOW Edelbrock 5089Edelbrock E-Street Cylinder Head Edelbrock Cylinder Head E-Street SB Chevrolet 64cc (Complete Pair) $1,229.95
|
IN STOCK Cometic Gasket C5489-030Cometic Gasket Head Gaskets Cometic GM LS1/LS2/LS3/LS6 Gen-3/4 Small Block V8 .030in. MLS Cylinder Head Gasket 4.100in. Bore $99.40
|
IN STOCK - LOW Cometic Gasket C5170Cometic Gasket Valve Cover Gaskets Cometic 99-05 GM LS1 Center Bolt Valve Cover Gasket $33.64
|
IN STOCK - LOW Cometic Gasket C5477-036Cometic Gasket Head Gaskets Cometic GM LS1 SB 4.000 inch Bore .036 inch MLS Headgasket $99.40
|
IN STOCK - LOW Cometic Gasket C5389-032Cometic Gasket AFM Gaskets Cometic Chevy/Dodge/Ford .032in AFM Fuel Pump to Block Gasket $23.54
|
IN STOCK - LOW Cometic Gasket C5404-030Cometic Gasket Head Gaskets Cometic Chevrolet Gen-1 Small Block V8 BRODIX BD2000 Heads 4.030in Bore .030in MLS Head Gasket $97.22
|
$54.73
|
For more information on Edelbrock part number 28001, you can visit the official Edelbrock website.