New Affordable Coilovers From Tein.

Fluidampr Engine Dampers


Fluidampr Engine Dampers image 1
General product image. Actual product may vary from image(s).
Category: Pulleys
Product Review:

Fluidampr Engine Dampers are designed to control destructive vibrations which are transfered thru the crankshaft.

Each time the air/fuel mixture inside a cylinder is ignited, the combustion that occurs creates a torque spike that is applied to the crankshaft through the piston and rod. This torque spike is so severe that it not only turns the crankshaft, it actually twists the crankshaft ahead of its normal rotation and then the crankshaft rebounds. This twisting action is known as torsional vibration. When these torque spikes and forces get into phase with the natural frequency, critical torsional harmonic vibrations occur and can be seriously destructive to the bearings and the crankshaft. Dampers are designed to control those destructive vibrations.

Critical harmonic vibrations occur numerous times in a engine’s operating range. Stock rubber and elastomer-type dampers are frequency sensitive “tuned absorbers”, and work at only one critical frequency. In the case of a stock rubber damper, it is tuned for a factory engine’s critical harmonic vibrations. If you change the mass of pistons, rods, or the crankshaft, you change the natural frequency of the crankshaft assembly; therefore, the stock damper is no longer tuned to the new frequency of vibration, and you may be headed for early failure of expensive engine components. Dampers also create heat while they work, and rubber is a poor dissipator of heat. This heat and the exposure to the elements deteriorates rubber, causing it to crack and change durometer, which then leads to inertia ring slippage, damper failure, uncontrolled torsional vibration, and costly engine parts breakage.

For more information on this product you may visit the Fluidampr website.



Fluidampr Engine Dampers Applications:


Part Number

 

Buy Now

Acura Fluidampr Engine Dampers
1990-2001 Acura

B Series Internally Balanced - Street Series - P/S, Air and Alt. pulley | Weight: 7.78lbs | Material: Steel | Size: 5-7/8 in. OD | Finish: Black Zinc

IN-STOCK
1990-2001 Acura

B Series Internally Balanced - Race Series - 40% under drive alt. pulley only | Material: Steel | Finish: Black Zinc | Size: 6-1/4 in. OD | Weight: 8.8lbs

IN-STOCK
2002-2010 Acura

K Series Internally Balanced - Street Series | Finish: Black Zinc | Weight: 6.5lbs | Material: Steel | Size: 5-7/8 in. OD

IN-STOCK
Honda Fluidampr Engine Dampers
1988-2000 Honda

B Series Internally Balanced - Street Series - P/S, Air and Alt. pulley | Weight: 7.78lbs | Material: Steel | Size: 5-7/8 in. OD | Finish: Black Zinc

IN-STOCK
1988-2000 Honda

B Series Internally Balanced - Race Series - 40% under drive alt. pulley only | Material: Steel | Finish: Black Zinc | Size: 6-1/4 in. OD | Weight: 8.8lbs

IN-STOCK
2002-2010 Honda

K Series Internally Balanced - Street Series | Finish: Black Zinc | Weight: 6.5lbs | Material: Steel | Size: 5-7/8 in. OD

IN-STOCK
Honda S2000
2000-2009 Honda S2000

S2000 / F20C / F22C Internally Balanced | Size: 5-1/2 in. OD | Finish: Black Zinc | Material: Steel | Weight: 5.7lbs

IN-STOCK
Mazda Fluidampr Engine Dampers
Mazda
Mazda

Duratech V-6 2.5L / 3.0L DOHC, 10% Underdrive Pulley Internally Balanced | Size: 5-7/8 in. OD | Finish: Black Zinc | Material: Steel | Weight: 8.7lbs

IN-STOCK
Mitsubishi Fluidampr Engine Dampers
Mitsubishi

EVO 8 & 9 Internally Balanced | Size: 6-1/8 in. OD | Finish: Black Zinc | Material: Steel | Weight: 6.8lbs

IN-STOCK
Mitsubishi

4G63/T DSM Internally Balanced | Size: 6-3/8 in. OD | Finish: Black Zinc | Material: Steel | Weight: 7.6lbs

IN-STOCK
Nissan Fluidampr Engine Dampers
Nissan

RB26DET Phase-1 BNR32 GT-R Internally Balanced | Size: 6-1/8 in. OD | Finish: Black Zinc | Material: Steel | Weight: 11lbs

IN-STOCK
Nissan

RB26DET Phase-2 BCNR33 GT-R & BNR-34 GT-R Internally Balanced | Size: 6-1/8 in. OD | Finish: Black Zinc | Material: Steel | Weight: 10.9lbs

IN-STOCK
Nissan

VQ35 350Z V-6 Internally Balanced | Size: 6-1/2 in. OD | Finish: Black Zinc | Material: Steel | Weight: 10.3lbs

IN-STOCK - LOW
Subaru Fluidampr Engine Dampers
2002-2010 Subaru

EJ Internally Balanced - Street Series | Size: 5-3/8 in. OD | Finish: Black Zinc | Material: Steel | Weight: 6.9lbs

IN-STOCK
Toyota Fluidampr Engine Dampers
Toyota

1JZ / 2JZ I-6 Internally Balanced | Size: 8-1/2 in. OD | Finish: Black Zinc | Material: Steel | Weight: 9.7lbs

IN-STOCK
Volkswagen Fluidampr Engine Dampers
1993-2008 Volkswagen

VR-6 / 12 & 24 V / 1993 - 2008 Internally Balanced | Size: 5-5/8 in. OD | Finish: Black Zinc | Material: Steel | Weight: 6.1lbs

IN-STOCK
2000-2005 Volkswagen

2000 2005 1.8L Turbo Motor / (4 bolt hole mounting) Internally Balanced | Size: 5-5/8 in. OD | Finish: Black Zinc | Material: Steel | Weight: 6.1lbs

IN-STOCK
2006-2008 Volkswagen

2006 2008 2.0L FSI Motor / (6 bolt hole mounting) Internally Balanced | Size: 5-5/8 in. OD | Finish: Black Zinc | Material: Steel | Weight: 6.1lbs

IN-STOCK

Don't see your application? We probably have it or can get it, click here.



Fluidampr Engine Dampers Reviews

There are currently no reviews. Be the first by reviewing Fluidampr Engine Dampers below.


Write a Review:

Rating:




Your Name:
Review Title:
Review: