Eagle CRS5630J3D ESP H-Beam Connecting Rods
Eagle ESP H-Beam Connecting Rods (CRS5630J3D) for a Honda H22. Honda H22 .864 in. pin / for use with Prelude Type S pistons (set of 4).
|Eagle CRS5630J3D H-Beam Rods for Honda H22A4 Prelude H22 fits Type-S Pistons
ebay - Ends 04/05/2020
|Eagle Honda H22A4 Engine Connecting Rods (Set of 4)
See partnumber notes and applications notes above for specific product information.
All Eagle "ESP" Connecting Rods are manufactured from a TWO-PIECE FORGING. The forging process forces the grain into the shape of a connecting rod, resulting in a superior fatigue life. The rod cap is forged separately so that the grain runs perpendicular to the load forces, which strengthens the connecting rod. Many aftermarket connecting rods are manufactured from 4340 steel. 4340 specs allow a range of different materials to achieve the desired results. Although it is a more expensive process, all Eagle "ESP" 3-D connecting rods also include higher content of nickel & chrome, which increases the strength & fatigue life without making the connecting rod brittle.
Extensive testing has proven Eagle's two-piece forging superior to any one-piece forging on the market! All Eagle "ESP" Rods are clearly identified. Proper rod bolt torque is vital to connecting rod life. A rod bolt fastner is without question the highest stressed fastener in the engine. The big end bore of the connecting rod is a stressed bore in much the same way as cylinders are on a block. It is equally important to torque properly to provide proper strength & to insure the big end of the rod sizing is correct. Improper torque will result in premature rod failure!
WARNING: Cancer & Reproductive Harm www.p65warnings.ca.gov
There are currently no reviews. Be the first by reviewing below.
Write a Review:
Click here to contact us with your question regarding Eagle ESP H-Beam Connecting Rods (CRS5630J3D).