Competition Clutch Stage 2 Clutch Kits (5153-2100) for a 2008-2015 Mitsubishi Lancer Evolution GSR / Evolution Final Edition. Comp Clutch 2008-2010 Mitsubishi Lancer Evo 10 Stage 2 - Steelback Brass Plus Clutch Kit.
4 Reviews
| Years | Make | Model | Trim | ||
|---|---|---|---|---|---|
| 2008-2008 | Mitsubishi | Lancer | Evolution GSR | ||
| 2010-2015 | Mitsubishi | Lancer | Evolution GSR | ||
| 2015-2015 | Mitsubishi | Lancer | Evolution Final Edition |
The Competition Clutch Stage 2 - Street Series 2100 Clutch Kit provides approximately 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Carbon Kevlar material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up.
The 2100 Series kit includes a performance pressure plate, a high torque sprung disc with antiburst steel backed Carbon Kevlar facings, all applicable bearings, and the appropriate alignment tool.
I installed this clutch in my RSX back in 2014 and it is still running strong. Grabs as well as it did when it was new and no issues since installation.
I've had my CC stage 2 clutch put on for about 8 months now, if that, and it already needs to be replaced. I don't drive like a maniac or "street race" or do anything like that that and it already needs to be replaced. Just warning anyone who is about to buy this product to research reviews on forums and other websites because i made a costly mistake. I wish someone would of told me before I spent all that money. I will never buy another CC product again.
The clutch was great. Grabbed awesome, pressure plate strong, But the throwout bearing was junk, everything was aligned properly, went together great, but shutters terribly, and is creating friction, have to take it all out again, and replace the bearing. overall a good kit, but bearing was crap.
Clutch is doing great, put atleast 5,500 miles on it and its still going perfect, strong as hell on launches and still driveable, perfect clutch for a daily driven/trackable car. Paired well with the Comp. clutch lightened Flywheel.
WARNING: Cancer & Reproductive Harm www.p65warnings.ca.gov IN STOCK - LOW ACT MB11-HDG6ACT HD/Race Clutch Kits ACT 08-17 Mitsubishi Lancer GT / GTS HD/Race Sprung 6 Pad Clutch Kit $567.00
|
 IN STOCK - LOW Exedy 05803AExedy Stage 1 Clutch Kits Exedy 2008-2015 Mitsubishi Lancer Evolution GSR L4 Stage 1 Organic Clutch $725.44 SALE
|
 IN STOCK ACT MB11-HDSSACT HD/Perf Street Clutch Kits ACT 08-17 Mitsubishi Lancer GT / GTS HD/Perf Street Sprung Clutch Kit $518.00
|
 IN STOCK Exedy 05803AHDExedy Stage 1 Clutch Kits Exedy 2008-2015 Mitsubishi Lancer Evolution GSR L4 Stage 1 Organic Clutch $782.64 SALE
|
 IN STOCK ACT ME3-HDG6ACT HD-M/Race Clutch Kits ACT 2015 Mitsubishi Lancer HD-M/Race Sprung 6 Pad Clutch Kit $858.00
|
 IN STOCK Exedy 05952AHDExedy Stage 2 Clutch Kits Exedy 2008-2015 Mitsubishi Lancer Evolution GSR L4 Stage 2 Cerametallic Clutch Thick Disc $1,045.11 SALE
|
 IN STOCK ACT ME3-HDSSACT HD-M/P Street Clutch Kits ACT 2015 Mitsubishi Lancer HD-M/Perf Street Sprung Clutch Kit $829.00
|
 IN STOCK ACT ME3-HDSDACT HD-M/P Street Clutch Kits ACT 2015 Mitsubishi Lancer HD-M/Perf Street Rigid Clutch Kit $826.00
|
 $436.00
|
 IN STOCK ACT T1S-M05ACT Mod-Twin Kits ACT EVO 10 5-Speed Only Mod Twin HD Street Kit Sprung Mono-Drive Hub Torque Capacity 700ft/lbs $1,748.00
|
 IN STOCK Torque Solution TS-EX-400Torque Solution Trans Mounts Torque Solution Aluminum Transmission Mount: Mitsubishi Lancer/Ralliart/Evolution X 2008-15 $196.15
|
 $183.00
|
 IN STOCK Torque Solution TS-UNI-013Torque Solution Shifter Extensions Torque Solution Billet 3in. Shifter Extension: Mitsubishi EVO/All Manual Shifters 10x1.25mm Thread $39.11
|
 IN STOCK Radium Engineering 20-0262Radium Engineering Clutch Fork Stop Radium Engineering Mitsubishi Evo 8-10 Clutch Fork Stop $52.77
|
For more information on Competition Clutch part number 5153-2100, you can visit the official Competition Clutch website.
