Cometic Gasket C4300-030 Cometic Head Gasket
Cometic Head Gasket (C4300-030) for a 2002-2004 Acura RSX Type S and 2002-2005 Honda Civic Si. K20A1 / K20A2 / K20A3 / K24A - MLS .030.
|Cometic Head Gasket Honda Acura 2.0L DOHC 4cyl 86mm .030" bore
ebay - Ends 07/30/2020
|COMETIC 86MM HEAD GASKET FOR ACURA RSX K20A2 K20Z1 / EP3 CIVIC SI K20A K20A3
ebay - Ends 08/08/2020
|Cometic C4300-030 Head Gasket
|COMETIC C4300-030 HEAD GASKET 86MM .030" for RSX/CIVIC SI/ACCORD 2/2.4L
ebay - Ends 07/13/2020
|Cometic Head Gasket Honda Acura K20 K24 86mm Bore MLS .030" Thickness C4300-030
ebay - Ends 07/31/2020
|Cometic Gasket Automotive C4300-030 Cylinder Head Gasket
ebay - Ends 07/19/2020
|For Honda Civic 02-05 Cometic Gasket C4300-030 MLS Series Cylinder Head Gasket
ebay - Ends 08/11/2020
|Cometic MLS Head Gasket for Honda K20A/K24 86mm/.030" (C4300-030)
ebay - Ends 07/15/2020
|Cometic .030" MLS Head Gasket | 86mm Bore for Honda K-Series DOHC 4Cyl C4300-030
ebay - Ends 08/12/2020
|Cometic Gasket C4300-030 Cylinder Head Gasket; 0.030 In. Mls; 86Mm Bore
|COMETIC MLS Head Gasket For Honda/Acura K20A1/K20A2/K20A3 2.0L 4cyl - C4300-030
ebay - Ends 08/09/2020
|MLS Cometic Head Gasket 86mm .030" for Honda K20A1 K20A2 K20A3 K24A C4300-030
ebay - Ends 08/02/2020
|Engine Cylinder Head Gasket Cometic Gasket C4300-030
ebay - Ends 08/10/2020
|COMETIC 86mm K-Series Head Gasket: .030" Thickness
ebay - Ends 08/08/2020
See partnumber notes and applications notes above for specific product information.
The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 2500C or 4820F.
The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.
The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.
WARNING: Cancer & Reproductive Harm www.p65warnings.ca.gov
There are currently no reviews. Be the first by reviewing below.
Write a Review:
Click here to contact us with your question regarding Cometic Head Gasket (C4300-030).