Cometic Gasket C4252-030 Cometic Head Gasket
Cometic Head Gasket (C4252-030) for a 1997-2001 Honda Prelude. H22A4 - MLS .030.
|Cometic Gaskets C4252-030 HEAD GSKT HONDA PRELUDE 87MM
ebay - Ends 08/23/2020
|Cometic Head Gasket BB6 Honda Prelude 97-02 H22A H22A4 87mm Bore 0.8mm Thickness
ebay - Ends 09/03/2020
|Cometic .030" MLS Head Gasket | 87mm Bore for Honda H-Series C4252-030
ebay - Ends 08/12/2020
|Cometic MLS Head Gasket 87mm .030 Honda Prelude H22A4 C4252-030
ebay - Ends 08/27/2020
|Cometic Head Gasket .030" Thick 87mm Bore For 1997-2001 Honda Prelude H22 H22A
ebay - Ends 09/06/2020
See partnumber notes and applications notes above for specific product information.
The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 2500C or 4820F.
The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.
The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.
WARNING: Cancer & Reproductive Harm www.p65warnings.ca.gov
There are currently no reviews. Be the first by reviewing below.
Write a Review:
Click here to contact us with your question regarding Cometic Head Gasket (C4252-030).