BMR Suspension Panhard Rods (PHR005R) for a 2005-2014 Ford Mustang. BMR 05-14 S197 Mustang Non-Adj. Panhard Rod (Polyurethane) - Red.
Years | Make | Model | Trim | ||
---|---|---|---|---|---|
2005-2014 | Ford | Mustang | GT | ||
2005-2014 | Ford | Mustang | Base | ||
2007-2014 | Ford | Mustang | Shelby GT500 | ||
2007-2008 | Ford | Mustang | Shelby GT | ||
2008-2009 | Ford | Mustang | Bullitt | ||
2008-2009 | Ford | Mustang | Shelby GT500KR | ||
2012-2013 | Ford | Mustang | Boss 302 |
A Panhard rod is a suspension link that both locates the rear axle housing laterally and controls side-to-side movement. Factory S197 Mustang Panhard rods are made from weak U-shaped stamped steel with soft rubber bushings that allow excessive deflection under load. BMR Suspension's PHR005 Panhard rod is made 1.25-inch, 0.120-inch wall DOM tubing for unrivaled strength. The PHR005 features greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve, keeping grease in the bushing under high compression loads. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the PHR005 to work well for street performance, drag race, and road race applications. The heavy-duty construction eliminates the deflection seen in stamped-steel Panhard rods. Other Panhard rods on the market include rubber bushings that will deflect under heavy loads. The 95-durometer polyurethane bushings of the PHR005 reduce bushing deflection, giving you much-improved, repeatable handling characteristics on the street, starting line, or in aggressive corners. The non-adjustable design makes the PHR005 great for stock height Mustangs. This gives you all the strength you need for great handling without huge increases in NVH. When performance is a must, rely on BMR Suspension! BMR Suspension's PHR005 non-adjustable Panhard rod is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.
IN STOCK BMR Suspension PHR006HBMR Suspension Panhard Rods BMR 05-14 S197 Mustang On-Car Adj. Panhard Rod (Polyurethane) - Black Hammertone $155.06
|
IN STOCK - LOW BMR Suspension PHR005HBMR Suspension Panhard Rods BMR 05-14 S197 Mustang Non-Adj. Panhard Rod (Polyurethane) - Black Hammertone $127.34
|
IN STOCK Whiteline KPR068Whiteline Panhard Rods Whiteline 05-14 Ford Mustang Coupe Rear Panhard Rod - Complete Adj Assembly $190.88
|
IN STOCK - LOW BMR Suspension XSB011RBMR Suspension Sway Bar Kits BMR 05-14 S197 Mustang Rear Bolt-On Hollow 35mm Xtreme Anti-Roll Bar Kit (Delrin) - Red $769.95
|
IN STOCK Whiteline KTA195Whiteline Control Arms - Rear Whiteline 05+ Ford Mustang Rear Control Arm-Complete Lwr Arm Assembly (Pinion Angle Correction) $294.88
|
IN STOCK - LOW Ridetech 12152401Ridetech HQ Air Shock Kits Ridetech 05-14 Ford Mustang ShockWave System HQ Series Front Pair $1,555.00
|
$320.28
|
IN STOCK Whiteline KCA414Whiteline Camber Adj Kits Whiteline 02-07 WRX F&R / 03-07 Impreza NA F&R / 04-07 STi F&R / 08+ WRX Hatch F Only / 08-09 STi $53.86
|
IN STOCK KONI 8750 1108KONI STR.T (Orange) Shock Koni STR.T (Orange) Shock 11-14 Ford Mustang V6 & V8 All models excl. GT 500 - Front $157.45 SALE
|
$89.89
|
For more information on BMR Suspension part number PHR005R, you can visit the official BMR Suspension website.